Abena Slip 4 - XL

Abena Slip 4 description

Abena Slip 4 is a non-woven all-in-one brief brought to you by Abena.
Very easy to use, it is put in place with readjustable sealing strips. The combination of velcro and sealing strips ensure perfect fixation, even if readjusted time and again.

• For very heavy urinary and faecal incontinence.
• Suitable for men and women.

The full Abena Slip range

To find out which products in our range are best suited to your needs, here is a summary table showing the various absorption products and available sizes:

Abena Slip application technique

In standing up position

1. Fold the brief lengthwise, the inlay film turned towards the outside. Do not touch the inside of the diaper.
2. Slip the protection between the legs from the front to the back.
3. Straighten out the back of the brief horizontally. Create a pants "with leg cuffs".
4. Straighten out the back of the brief horizontally. Make it is fitted straight around the groin, the inlay film turned towards the outside.
5. Fasten the sealing strips at the bottom on both sides. It may help to point the strips slightly upwards to make sure the protection properly holds around the legs.
6. Create a crease in the brief strip.
7. Fasten the fasteners at the top, pointing them towards the back.
8. Adjust the edges of the protection around the groin, whilst making sure the inlay film is turned towards the outside.

In suspine position

1. Fold the brief lengthwise, the inlay film turned towards the outside. Do not touch the inside of the diaper.
2. Position the user on his side, slip the all-in-one brief between his legs.
3. Adjust the brief around the back.
4. Place the user on his back. Unfold the protection around the front, thereby creating a groove around the groin.
5. Fasten the sealing strips at the bottom on both sides. It may help to point the strips slightly upwards to make sure the protection properly holds around the legs.
6. Create a crease in the brief strip.
7. Fasten the fasteners at the top, pointing them towards the back.
8. Adjust the edges of the protection around the groin, whilst making sure the inlay film is turned towards the outside.

If the self-adhesive fasteners need to be stuck beyond the second strip on the Tape Landing Zone, this means the protection is too big and you need to go for a smaller size.
If the size is too big this increases the risk of leakage!

Abena Slip 4 Characteristics